Supplied in 25 kg plastic lined sacks, the grey powder incorporates special fibres to reinforce the screed and provide excellent crack resistance. Meanwhile, the fast application, self-levelling characteristics help minimise downtime, while the option to apply by pump means areas of up to 2,000 m² can be laid during a single day.
SX100 should be used in conjunction with a DPM while tremco illbruck Technical Services can be contacted to carry out a moisture test to ensure the RH of the substrate is below 75%. Steel and metal decks should be prepared and primed with TREMCO CS100 Epoxy Primer for Non-porous surfaces, while concrete or sand/cement screeds require priming with TREMCO CS150 Acrylic Primer.
SX100 offers an open time of 30 minutes and provides an average coverage of 4 m² per mix at a thickness of 4 mm. It can be walked on in two to four hours and achieves a 28 day compressive strength of 30 N/mm². Installation of final floor finishes can take place as soon as the relative humidity falls below 75%.
SX100 is available through the manufacturer’s network of local and national stockists or direct from tremco illbruck.