The double-sided, scrimmed adhesive bonding tape has been specially developed to offer aggressive high grab and should be applied to the face of the part to be fixed, and the liner paper removed, before pressing firmly in position on the wall. No additional fixings are required to secure profiles like capping strips, with the tape bonding permanently to most substrates, even across highly plasticised vinyl.
Acrylic-based, TREMCO TF448 is also easy to use as it needs none of the solvents that are typically required when applying and cleaning up after using contact adhesive , saving time and money.
Then from an environmental standpoint, the multi-purpose tape is both non-flammable and of low toxicity earning EC1 categorisation for a healthier alternative to many other contact adhesives.
Available in widths of 25, 50 and 85mm, TREMCO TF448 comes in easy to handle 50 metre rolls and measures just 0.45mm thick.
Minimal preparation is required before using TREMCO TF448, though normal restrictions on contamination of the substrate apply, and dusty or very porous surfaces should be sealed using TREMCO CS150 Acrylic Primer.
Typifying the ‘apply and walk away’ peace of mind pioneered by tremco illbruck, TREMCO TF448 High Performance Bonding Tape exhibits minimal loss of strength over time and thereby offers lasting, trouble free performance. The manufacturer also offers a full technical advisory service to assist with specification, and a team of Technical Sales Representatives able to deliver training or support on site.